VW T5 T5.1 T6 modified sliding window gasket for leaky windows 2005-2019 years

Are you experiencing leaks or annoying wind noise through your sliding window? Look no further – you’ve landed in the right place! We’ve specifically modified this sliding window gasket to address and eliminate these common issues.

Our specially modified sliding window gasket will solve these issues for vehicles from 2005 to 2019.

T6.1 2020-2023 users facing similar problems with their sliding windows, worry not! Our T6.1 sliding window gaskets are currently in the works and will be available soon.

Content of package:

With each purchase, you’ll receive 1.90 meters of sealing material for your sliding windows.

Features:

Leak-Free Solution: Our customized gasket ensures a tight seal, putting an end to any unwanted leaks.

Noise Reduction: Say goodbye to bothersome wind noise as our modified gasket effectively minimizes sound intrusion.

Expertly Crafted: Designed with precision and expertise, our gasket guarantees a perfect fit for your sliding window.

Installation Tips:

1. The bottom rubber groove of the sliding window is most likely to be rusted, so it’s advisable to use a bit of sealant to secure the rubber into the groove.
2. Apply a small amount of sealant for the finishing joint as well.
3. When assembling the rubber, remember to make holes at the top and bottom of the window. Make three holes every 10-15 cm with a small screwdriver. These holes are necessary for air to escape from the inside when pressing the rubber. (Refer to the original rubber for reference)
4. The first closure of the window is the most challenging. Close the window as far as it goes; the handle is not yet fixed. Approach the window from the outside, press the protruding rubber towards the inside at the corners closest to the front of the car. Return to the inside of the car; now, using gentle pressure on the sides of the handle, press firmly directly onto the window. The handle should gradually secure until it finally locks. DO NOT USE EXCESSIVE FORCE.
5. Great! The window is closed. Check if you are satisfied with the result, if there is no water leakage, if the wind doesn’t whistle, and if the rubber fits everywhere nicely.
6. Leave the window closed for at least a week for the rubber to settle. I must note that sometimes closing the window may require a bit of force by pressing the locking mechanism, due to the thicker rubber. But I can assure you it will be easier than the first time.
7. Important to know. These rubbers are suitable for windows from 2005 to 2019 (closed window corners with glass fit precisely or almost precisely). The first version of the window from 2003 to 2005, the sliding window with glass, does not fit precisely; the sliding window is about 0.5 cm away from the glass. However, owners of the first version windows, don’t worry; I have a solution for you too.
8. Do not use any lubricants, WD-40, etc., as it will only complicate the process.

Upgrade your driving experience now! Buy confidently, knowing our upgraded sliding window gasket is the solution you’ve been searching for. Don’t let leaks and wind noise disrupt your journey – order today and experience the comfort of a leak-free, serene drive!